[Elecraft] K3 and N1MM setup problem (Operator Error I suspect)

[Tony McClenny]

Please help me if you have time.

 

I have a K3 with the digital voice recorder (DVR) and wish to use voice
files from N1MM this weekend in the Delaware QSO Party.  I would prefer to
use N1MM for the voice files and not the K3 DVR.  The voice files were
previously used with my Kenwood TS-570D and a RigBlaster Pro interface.  

 

I have the K3 connected to my computer via RS-232 cable for rig control
(works fine DX4Win logging and N1MM).  I have two audio cables from the K3
to the computer sound card, which work fine for rtty, PSK, etc.  K3 PTT-KEY
is set to rts-dtr.

 

When I click on the N1MM function key to transmit a voice file, the rig goes
into transmit mode BUT the voice file is not transmitted or if it is, I
cannot hear it in my headphones or via K3 speaker.  The RF meter on the K3
does not indicate any outgoing power.  

 

Can you determine from this information what I am missing?  Thank you for
your consideration.

 

 

- Tony, N3ME -


118 Ashwood Street
Bethany Beach, DE 19930-9699

Grid:  FM28lm
http://www.n3me.net
Elecraft K3 # 2462