[Elecraft] using K3 with THP Hl-1.5KFX amp

[w5ov at w5ov.com]

Array Solutions has the cables for connecting the K3 to either the
HL-2.5KFX or HL-1.5KFX.

> If you check the archives I believe this topic is covered specifically for
> that amp. I use the 2.5KFX and it provides auto bandswitching from the K3.
> I use a W2 watt meter to protect the 2.5KFX in the event of poor antenna
> selection or mistune.  The cable for the AMP was purchased from DX
> Engineering as I recall.  Any vendor who sells the amp will sell you the
> proper cable.
>
> Bill
> K9YEQ
> K2 and KX1 field tester, K3 and modules
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Linda and Bob
> Sent: Monday, August 23, 2010 10:37 AM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] using K3 with THP Hl-1.5KFX amp
>
> Has anyone used a THP HL- 1.5KFX amp with the K3? Can you use the amp and
> K3
> with auto band changing data? If so, does the K3 emulate either the ICOM,
> Kenwood or Yaesu band tracking data? Otherwise, I would have to change the
> bands manually.
>
> Bob Wilderman, K3SRO
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>