[Elecraft] using K3 with THP Hl-1.5KFX amp

[Bill K9YEQ]

If you check the archives I believe this topic is covered specifically for
that amp. I use the 2.5KFX and it provides auto bandswitching from the K3.
I use a W2 watt meter to protect the 2.5KFX in the event of poor antenna
selection or mistune.  The cable for the AMP was purchased from DX
Engineering as I recall.  Any vendor who sells the amp will sell you the
proper cable.

Bill
K9YEQ
K2 and KX1 field tester, K3 and modules

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Linda and Bob
Sent: Monday, August 23, 2010 10:37 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] using K3 with THP Hl-1.5KFX amp

Has anyone used a THP HL- 1.5KFX amp with the K3? Can you use the amp and K3
with auto band changing data? If so, does the K3 emulate either the ICOM,
Kenwood or Yaesu band tracking data? Otherwise, I would have to change the
bands manually.

Bob Wilderman, K3SRO
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html