[Elecraft] P3 - 105

[Joe Subich, W4TV]

I could certainly see an option that would "hold" the center frequency
if is was not the same as VFO A or VFO B ... I could also see an option
that would allow the center to track VFO B instead of VFO A.

73,

    ... Joe, W4TV


On 8/21/2010 12:48 PM, Terry wrote:
>
> 105 up and working - very nicely !
> I think this was mentioned previously .. it would be very useful to be
> able to pick a `section` of the band to display without being tied to
> the K3 centre frequency, for instance, if a station was listening `up 10
> to 20` the span could be set to 10kcs and the whole of the `10 to 20 up`
> area viewed, rather than, at present, having to actually set the span to
> 40 kcs to view that section, with the lower 20kcs of no interest.
>
> Think that makes sense !
>
> 73
> Terry
> G4AMT
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>