[Elecraft] [P-3] Feature request for easier QSY

[Alan Bloom]

Hi Art,

> ... it's very easy to move it slightly as you tap it and end up slightly off the desired frequency.

I'm surprised you're having that problem.  It did exist on early 
prototypes, but back around firmware version 00.23 I added an 
anti-false-knob-rotation algorithm for the QSY function.  It keeps track
of the last six MKR A or MKR B values during knob rotation and the time 
each one occurred.  When the knob is tapped, it assumes any knob 
rotation in the last 200 ms is not "real" and uses the last value 
before that.  So any knob rotation for 200 ms before the tap is ignored.

I do plan to add a MENU item to assign the knob tap to a FN key, but I'm
hoping nobody uses it!  If there's a problem with the operation of the
knob switch I want to fix it so people don't have to do that.

By the way, there were some improvements in the knob decoding algorithm
and MKR A and MKR B operation in versions 00.30 and 00.31, so you
probably want to be sure you have the latest firmware.  I think 00.32 is
the current release.

Alan N1AL



On Sat, 2010-08-21 at 12:02 -0400, kz5d at aol.com wrote:
> Would it be possible to add a menu choice to assign a FN key to cause the K-3 to QSY to the frequency of  a Marker? By requiring us to use the knob to Tap to QSY, it's very easy to move it slightly as you tap it and end up slightly off the desired frequency.
> 
> It would be much easier, in my opinion, to use the knob to set the desired frequency, then Tap FN4 or FN8 to cause the K-3 to QSY.
> 
> Otherwise, I'm very pleased with the P-3's performance.
> 
> 73, 
> 
> Art KZ5D
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html