[Elecraft] Problem connecting LP_Bridge through the P3 to the K3

[Ted Roycraft]

Do you know how the P3 is implementing the "transparency"?  Why do you 
feel it necessary to prejudge?  Oh, right ...

73, Ted, W2ZK

On 8/8/2010 8:07 PM, Joe Subich, W4TV wrote:
>
> > Nevertheless, it's not transparent.
>
> Depends on one's definition of "transparent."  It appears to work with
> every application I've thrown at it except for initializing LP-Bridge.
> To me that implies an issue with LP-Bridge - perhaps an excessive
> sensitivity to timing - not an issue with the P3/K3.
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 8/8/2010 1:21 PM, Ted Roycraft wrote:
>> Nevertheless, it's not transparent. Maybe we should allow it to be
>> translucent? :-)
>>
>> 73, Ted, W2ZK
>>
>> On 8/8/2010 12:22 PM, Joe Subich, W4TV wrote:
>>>
>>>>> ... Maybe it is a nit on my
>>>>> part but the RS-232 port on the P3 is supposed to be transparent to
>>>>> apps
>>>>> connecting to the K3 via RS-232 and it isn't - not strictly speaking
>>>>> anyway since LP-Bridge hangs while connecting to the K3 if the P3 is
>>>>> on. I figure now is the time to get Elecraft to address these 
>>>>> kinds of
>>>>> things.
>>> I would not be so quick to blame the P3. P3 works just fine with
>>> microHAM Router and other port sharing software. It may be that
>>> LP-Bridge is too critical of the timing or expects the K3 to respond
>>> to a particular AI or K3 mode that is incompatible with the P3.
>>>
>>> 73,
>>>
>>> ... Joe, W4TV
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>>
>>
>
>