[Elecraft] K3 and N1MM Logger

[Jim Brown]

On Tue, 3 Aug 2010 12:28:54 -0400, Tommy Alderman wrote:

> It was working just fine right after I reset the
>RS242 to the correct (19200 b) baud rate; then I updated to the beta 4.03
>firmware and now it does not talk to N1MM again.

That's the problem. You must set BOTH the K3 and N1MM to the SAME baud rate. 
Changing it is what made it spit up. Like Guy, I use 38,400. Slower speeds 
also work. 

73, Jim K9YC