[Elecraft] KAT3 tuning bandwidth

[Brett Howard]

There are several solutions here...

1) Clear the memories for the band.  Enter Config then go to KAT3 and
press CLR.  This will clear your current ATU memories for that band
and 1 tuning will be used across the band but they will continue to be
learned as you tune.
2) Download K3EZ.  This is a simple application which one can find by
doing a search.  This application has a pane that will allow a user to
calibrate the K3 to their antenna on a per band/antenna basis.
3) Manually tune in every ATU window.

The ATU does stay put as you tune the VFO.  Its settings are only
updated when you've crossed memory region boundaries and you transmit.
 As soon as you transmit if you hear a click and the ATU icon flashes
that means that the K3 has recalled a tuning memory for you.

~Brett (N7MG)

On Sun, Aug 1, 2010 at 3:02 PM, Steef PA2A <pa2a at xs4all.nl> wrote:
> Guy,
>
> That works! I thought the tuner remained in the same position because no relay clicks were audible when turning the VFO across the band.
>
> 73 's Steef PA2A
>  ----- Original Message -----
>  From: Guy Olinger K2AV
>  To: Steef PA2A
>  Sent: Sunday, August 01, 2010 11:35 PM
>  Subject: Re: [Elecraft] KAT3 tuning bandwidth
>
>
>  See page 56 in the user manual.  Put the K3 on the band you want to
>  clear.  Go to CONFIG:KAT3:LC SET.  Tap CLR.  This should clear the
>  memories for that band.
>  73, Guy.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>