[Elecraft] Transmit on VFO B

[Joe Subich, W4TV]

> This method may be different than you had with your TS-850 
> and N1MM, but the capability is there - just tap A/B (or 
> have N1MM do it).

In N1MM Logger:  Alt-F10  (exchange VFOs). 
 


> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Don Wilhelm
> Sent: Sunday, September 20, 2009 6:08 PM
> To: Oliver Grossmann
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] Transmit on VFO B
> 
> 
> Olli,
> 
> Sorry for the 2 day old response, but I did not see any other 
> answers to 
> your question.
> The transmit stages are associated with the main receiver - 
> they cannot 
> be associated with the sub-RX.
> 
> If you have VFO A on a different band than VFO B, without the 
> sub-RX you 
> cannot listen on the VFO B frequency, so I conclude that you have the 
> sub-RX because transmitting without listening is poor 
> practice that no 
> decent ham would do IMHO.
> 
> It is a simple matter to transmit on the band that VFO B is set to - 
> simply tap A/B to swap the VFOs and you are ready to transmit on the 
> frequency/band that was previously set in VFO B - only now it 
> is in VFO A.
> 
> This method may be different than you had with your TS-850 
> and N1MM, but 
> the capability is there - just tap A/B (or have N1MM do it).
> 
> 73,
> Don W3FPR
> 
> Oliver Grossmann wrote:
> > Me again,
> > i forget, Tx on VFO B if VFO B is on different Band.
> >
> > 73 Olli, DH2WQ
> >
> > 
> ----------------------------------------------------------------------
> > --
> >
> > Oliver Grossmann | DH2WQ | oliver.grossmann at bretzi.de
> >
> >
> >
> > Oliver Grossmann wrote:
> >   
> >> Hi,
> >> I know it was discussed before, but i haven't found a 
> final statement 
> >> in
> >> the archives of the List.
> >> My last info is it is impossible to Transmit on VFO B 
> during Output 
> >> Filter Switching and QSK.
> >>
> >> I'm not sure if somebody ask to switch off QSK in this split mode. 
> >> Are there any plans to have such a feature in the future? 
> (I really 
> >> like this on my TS-850 in combination with N1MM)
> >>
> >> Thanks Olli, DH2WQ
> >>     
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html