[Elecraft] K3 Audio Response - Version 3.33 Firmware

[Lyle Johnson]

> With the latest 3.33 pre-released test I am unable to set the top two
> knobs to HI/LOW adjustments.  However this problem is only present when
> the radio is in the CW mode.  When in this mode tapping the HI/BW knob
> doesn't change it between modes.  
>   

When CONFIG PB CTRL CHIFT=.01 you can;t use HI CUT/LO CUT> IF SHIFT=.05 
(default), then you can.  See Release notes for 3.25/2.21.

73,

Lyle KK7P