[Elecraft] A Very, Very, Very Minor K3 Quirk

[Joe Planisky]

Hi Al,

There are many strange behaviors in LO CUT/HI CUT mode that have been  
there for a long time.  They aren't usually noticeable in normal day- 
to-day operation, but they just make no sense.  If you're curious,  
search the list archives for a message with the subject "K3 - LO CUT/ 
HI CUT bugs" from November 26, 2008 to see my observations.  Note that  
some of the specific things I point out in that posting don't quite  
work the same way today, but the general theme of odd things happening  
in LO CUT/HI CUT mode remains valid.

I also agree that it should be a low priority item on the to-be-fixed  
list.

73
--
Joe KB8AP


On Sep 12, 2009, at 12:42 AM, Al Lorona wrote:

> Let's say you have selected a 2.8 kHz filter. Use the LO CUT control  
> to move the low cut freq to 0.00.
>
> Now turn that same control clockwise and notice that it goes to  
> 0.20, 0.30, 0.40.
>
> Now move the control back down. Notice that it goes to 0.30, 0.20,  
> 0.10, and then finally, 0.00.
>
> So to select 0.10, one must increase past this value, then come back  
> down.
>
> Note that I'm not asking for a firmware fix, just simply pointing  
> out this curious behavior.
>
> Al  W6LX
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html