[Elecraft] A Very, Very, Very Minor K3 Quirk

[Wes Stewart]

I reported that to "headquarters" many months ago.

Wes

--- On Sat, 9/12/09, Al Lorona <alorona at sbcglobal.net> wrote:

From: Al Lorona <alorona at sbcglobal.net>
Subject: [Elecraft] A Very, Very, Very Minor K3 Quirk
To: "Elecraft Reflector" <elecraft at mailman.qth.net>
Date: Saturday, September 12, 2009, 1:42 AM

Let's say you have selected a 2.8 kHz filter. Use the LO CUT control to move the low cut freq to 0.00.

Now turn that same control clockwise and notice that it goes to 0.20, 0.30, 0.40.

Now move the control back down. Notice that it goes to 0.30, 0.20, 0.10, and then finally, 0.00. 

So to select 0.10, one must increase past this value, then come back down.

Note that I'm not asking for a firmware fix, just simply pointing out this curious behavior.

Al  W6LX

 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html