[Elecraft] New K3 feature -- need testers: Main/Sub Audio Mixing Control (MIX menu entry)

[Brett Howard]

I guess nevermind... Its open and out there already.  Thanks!

~BTH

On Wed, 2009-10-28 at 11:15 -0700, Brett Howard wrote:
> I'd be interested in getting a copy of this one to play with...
> 
> ~Brett
> 
> On Mon, 2009-10-26 at 20:00 -0700, Wayne Burdick wrote:
> > Normally, main RX audio is heard in the left channel, and sub in the  
> > right. Now, using the CONFIG:MIX menu entry, you can put main RX audio  
> > in both channels while leaving sub audio in only one (or vice-versa;  
> > or even put both receivers in both channels).
> > 
> > Some of you may be doing this already using a direct DSP command from  
> > K3 Utility. The menu entry is more convenient, and it's "sticky" --  
> > i.e., it is set up automatically whenever you turn on the sub receiver.
> > 
> > "Mixing" main/sub audio on one side or the other is useful if you're  
> > focusing more on the signal from one receiver. Another benefit is that  
> > AFX (audio effects) can be used even while the sub receiver is turned  
> > on. This is because AFX, if turned on, will apply to receiver audio  
> > routed to both left and right audio channels.
> > 
> > We could use additional testers for this feature. If you're  
> > interested, please email me directly (n6kr at elecraft dot com).
> > 
> > 73,
> > Wayne
> > N6KR
> > 
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> > 
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> 
>