[Elecraft] New K3 feature -- need testers: Main/Sub Audio Mixing Control (MIX menu entry)

[Brett Howard]

I'd be interested in getting a copy of this one to play with...

~Brett

On Mon, 2009-10-26 at 20:00 -0700, Wayne Burdick wrote:
> Normally, main RX audio is heard in the left channel, and sub in the  
> right. Now, using the CONFIG:MIX menu entry, you can put main RX audio  
> in both channels while leaving sub audio in only one (or vice-versa;  
> or even put both receivers in both channels).
> 
> Some of you may be doing this already using a direct DSP command from  
> K3 Utility. The menu entry is more convenient, and it's "sticky" --  
> i.e., it is set up automatically whenever you turn on the sub receiver.
> 
> "Mixing" main/sub audio on one side or the other is useful if you're  
> focusing more on the signal from one receiver. Another benefit is that  
> AFX (audio effects) can be used even while the sub receiver is turned  
> on. This is because AFX, if turned on, will apply to receiver audio  
> routed to both left and right audio channels.
> 
> We could use additional testers for this feature. If you're  
> interested, please email me directly (n6kr at elecraft dot com).
> 
> 73,
> Wayne
> N6KR
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html