[Elecraft] K3 PB Ctrl Shift .01/.05

[Jim Miller KG0KP]

The bandwidth appears to be limited when using 10 hz so particularly in psk 
or rtty, I also switch fairly often and just dont use 10 hz unless I NEED 
it.  What would be nice, if possible, is to auto change to 10 hz shift when 
you adjust your width below 200 or so and back when you go above that width.

Thanks es 73, de Jim KG0KP

----- Original Message ----- 
From: "Wayne Burdick" <n6kr at elecraft.com>
To: "drewko" <drewko1 at verizon.net>
Cc: <Elecraft at mailman.qth.net>
Sent: Monday, October 26, 2009 10:42 AM
Subject: Re: [Elecraft] K3 PB Ctrl Shift .01/.05


> Drew,
>
> I never imagined anyone would switch back and forth between .01 and .
> 05 kHz SHIFT steps when I added this feature. Our customers who had
> lobbied for .01 kHz tried this setting, then (presumably) kept it that
> way.
>
> The passband has to be normalized after changing this setting in order
> to clean up internal variables associated with SHIFT and WIDTH.
>
> 73,
> Wayne
> N6KR
>
> On Oct 26, 2009, at 8:04 AM, drewko wrote:
>
>> Is there a reason why Config PB CTRL SHIFT forces BW to 400 Hz? It is
>> annoying having to restore the BW setting from 400 Hz every time you
>> change the PB shift step size, especially if you jump back and forth
>> alot between the two step sizes.
>>
>> 73,
>> Drew
>> AF2Z
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>