[Elecraft] [K3] KIO3 Pinout

[Dr. Werner Furlan]

hi Dick and all who responded, 

Dick Dievendorff schrieb am 20 Oct 2009 um 9:26:

> The schematic diagram (on the Elecraft web site) shows the KIO3's serial
> connector pin 7 is RTS_IN.
> 
> According to the schematic, pin 2 is RxD out, pin 3 is TxD in, pin 4 is DTR
> in, pin 5 is "common" (connected through a small choke to ground), pin 7 is
> RTS in, and the remaining DE9 pins are not connected.

everything is clear now. 
In my printed manual from 2007 there is a mistake which was corrected in the meantime. 
There is RTS listed as Pin 6 instead of Pin 7 and the unused Pin 6 is missing in the list of 
unused Pins. 

73! de Werner OE9FWV

-- 
If god can be god, why couldn't I?


Email powered by Pegasus Mail free at <http://www.pmail.com>
Homepage: <http://www.qsl.net/oe9fwv/>
Fone +43 5522 75013
Fax +43 5522 75013 15
Mobile +43 664 6340014
Elecraft K2 #5203 K3 #656