[Elecraft] [K3] KIO3 Pinout

[Dick Dievendorff]

The schematic diagram (on the Elecraft web site) shows the KIO3's serial
connector pin 7 is RTS_IN.

According to the schematic, pin 2 is RxD out, pin 3 is TxD in, pin 4 is DTR
in, pin 5 is "common" (connected through a small choke to ground), pin 7 is
RTS in, and the remaining DE9 pins are not connected.

The schematics are available from the Elecraft manual download page,
http://www.elecraft.com/K2_Manual_Download_Page.htm.
The direct URL for the schematic file (readable with Adobe Reader) is
http://www.elecraft.com/manual/K3_Schematics_Oct2008.pdf

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of oe9fwv
Sent: Tuesday, October 20, 2009 9:13 AM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] [K3] KIO3 Pinout


btw, 

does anybody know the answer to my initial question: 
what about Pin 7 on the K3IO serial connector?
Is it used or unused?
It is not mentioned in my manual, neither in the unused pins (1, 8, 9) nor
in the list of used pins. 


73! de Werner OE9FWV

-- 
View this message in context:
http://n2.nabble.com/KIO3-Pinout-tp3851431p3859578.html
Sent from the [K3] mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html