[Elecraft] K3 Firmware 3.44

[Jan Erik Holm]

On AM this has always been, at least on my unit SNR around 1500.
This K3 radio sure has a lot of artifacts.

/ SM2EKM
--------------------
Mike wrote:
> I noticed it in the AM broadcast band (.690), regardless of NR. There's 
> a tiny bit of it on the low end of 160M also. I'd describe it as if the 
> BW control had a pawl, or detent.
> #3539
> 
> Mike, NF4L
> 
> Elliott Lawrence wrote:
>> I installed the latest 3.44 firmware and the associated DSP firmware 
>> yesterday.  The install went without a problem although I am always a bit 
>> anxious at the completion bars slowly march across the screen!
>>
>> I've noticed with the NR engaged and the BW control being adjusted that the 
>> audio blanks as each step occurs (a popping sound). I don't remember that 
>> being there with my previous version 3.3.  The blanking does not occur with 
>> the NR off. It just smoothly changes the bandwidth.
>>
>> Does anyone else notice this condition?  Is it a function of the changes 
>> made to eliminate the audio screech? So far everything else seems to be 
>> functioning OK.
>>
>> 73
>> Elliott WA6TLA K3 S/N 3381 
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>   
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>