[Elecraft] K3 Firmware 3.44

[Mike]

I noticed it in the AM broadcast band (.690), regardless of NR. There's 
a tiny bit of it on the low end of 160M also. I'd describe it as if the 
BW control had a pawl, or detent.
#3539

Mike, NF4L

Elliott Lawrence wrote:
> I installed the latest 3.44 firmware and the associated DSP firmware 
> yesterday.  The install went without a problem although I am always a bit 
> anxious at the completion bars slowly march across the screen!
>
> I've noticed with the NR engaged and the BW control being adjusted that the 
> audio blanks as each step occurs (a popping sound). I don't remember that 
> being there with my previous version 3.3.  The blanking does not occur with 
> the NR off. It just smoothly changes the bandwidth.
>
> Does anyone else notice this condition?  Is it a function of the changes 
> made to eliminate the audio screech? So far everything else seems to be 
> functioning OK.
>
> 73
> Elliott WA6TLA K3 S/N 3381 
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>