[Elecraft] K3 Monitor feedback

[Dick Dievendorff]

I'm attempting to gather these into the K3 Utility Help.  There are a number
of them already there.

Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Richard S. Lindzen
Sent: Friday, November 27, 2009 8:42 AM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 Monitor feedback

Maybe a list of popular macros and instructions on how to implement 
them would be helpful.  Perhaps it could be posted on the Elecraft site.

Dick, KA1SA

At 08:57 AM 11/27/2009, Don Wilhelm wrote:
>Mike,
>
>Easier than trying to absorb the entire manual, I go to the menu pages
>and try to remember what menu items are available - that gives me a good
>idea about how the radio can be configured.  Then if I want some
>particular behavior, I study that portion of the manual.  The buttons
>are usually relatively easy and self explanatory because they have labels.
>
>You may want to attack your monitor on/off request with a couple of
>macros - there is no on/off switch or button without macros.
>
>73,
>Don W3FPR
>
>Mike wrote:
> > Thanks, Tom -
> > When I got the manual, my thought was "Wow. That's BIG". Now I'm
> > thinking it could easily be three or four times the number of pages to
> > explain everything in detail. OTOH, this group is probably faster than
> > trying to find it in a printed book. Learning, learning, learning..(sung
> > to the tune of 'Rawhide').
> >
> > There doesn't appear to be a way to leave the volume of the monitor set
> > and just turn it off, correct?
> >
> > 73, Mike NF4L
> >
> > Tom Williams wrote:
> >
> >> Mike,
> >>
> >> I had the same thing happen to me. Unfortunately, I didn't read 
> your post in time to respond. The K3 audio menu settings are per 
> mode. When I switched to AM, I had the rear panel mic enabled and 
> the MIC+LIN turned ON. When I turned MIC+LIN OFF the feedback went 
> away. The operation of this menu function wasn't exactly clear to 
> me so I had set it up the way I thought it should be for all modes 
> (SSB, AM, PSK and FSK). I was wrong.
> >>
> >> 73,
> >> Tom N2CU <><
> >> K3/100 #3582
> >>
> >> ______________________________________________________________
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft at mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >>
> >>
> >>
> >
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > ------------------------------------------------------------------------
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 9.0.709 / Virus Database: 270.14.83/2528 - Release Date: 
> 11/26/09 04:10:00
> >
> >
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html