[Elecraft] K3 Monitor feedback

[Wayne Burdick]

Many of them are detailed in K3 Utility's help info. Also see the K3  
Programmer's Reference.

73,
Wayne
N6KR

----
http://www.elecraft.com

On Nov 27, 2009, at 9:41 AM, "Richard S. Lindzen" <rlindzen at MIT.EDU>  
wrote:

> Maybe a list of popular macros and instructions on how to implement
> them would be helpful.  Perhaps it could be posted on the Elecraft  
> site.
>
> Dick, KA1SA
>
> At 08:57 AM 11/27/2009, Don Wilhelm wrote:
>> Mike,
>>
>> Easier than trying to absorb the entire manual, I go to the menu  
>> pages
>> and try to remember what menu items are available - that gives me a  
>> good
>> idea about how the radio can be configured.  Then if I want some
>> particular behavior, I study that portion of the manual.  The buttons
>> are usually relatively easy and self explanatory because they have  
>> labels.
>>
>> You may want to attack your monitor on/off request with a couple of
>> macros - there is no on/off switch or button without macros.
>>
>> 73,
>> Don W3FPR
>>
>> Mike wrote:
>>> Thanks, Tom -
>>> When I got the manual, my thought was "Wow. That's BIG". Now I'm
>>> thinking it could easily be three or four times the number of  
>>> pages to
>>> explain everything in detail. OTOH, this group is probably faster  
>>> than
>>> trying to find it in a printed book. Learning, learning, learning.. 
>>> (sung
>>> to the tune of 'Rawhide').
>>>
>>> There doesn't appear to be a way to leave the volume of the  
>>> monitor set
>>> and just turn it off, correct?
>>>
>>> 73, Mike NF4L
>>>
>>> Tom Williams wrote:
>>>
>>>> Mike,
>>>>
>>>> I had the same thing happen to me. Unfortunately, I didn't read
>> your post in time to respond. The K3 audio menu settings are per
>> mode. When I switched to AM, I had the rear panel mic enabled and
>> the MIC+LIN turned ON. When I turned MIC+LIN OFF the feedback went
>> away. The operation of this menu function wasn't exactly clear to
>> me so I had set it up the way I thought it should be for all modes
>> (SSB, AM, PSK and FSK). I was wrong.
>>>>
>>>> 73,
>>>> Tom N2CU <><
>>>> K3/100 #3582
>>>>
>>>> ______________________________________________________________
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Elecraft at mailman.qth.net
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>
>>>>
>>>>
>>>
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> --- 
>>> --- 
>>> ------------------------------------------------------------------
>>>
>>>
>>> No virus found in this incoming message.
>>> Checked by AVG - www.avg.com
>>> Version: 9.0.709 / Virus Database: 270.14.83/2528 - Release Date:
>> 11/26/09 04:10:00
>>>
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html