[Elecraft] [K3] K3 in SS SSB

[Greg]

For the UNDO macro use FR0; to turn split off.
Name-Big Knob RIT On
SWT13;SWT13;FT1;LK$1;RT0;XT0;

Big Knob RIT off
SWT13;SWT13;FR0;LK$0;RT0;XT0;


----- Original Message ----- 
From: "Greg - AB7R" <ab7r at cablespeed.com>
To: "Barry N1EU" <barry.n1eu at gmail.com>
Cc: <elecraft at mailman.qth.net>
Sent: Tuesday, November 24, 2009 2:33 PM
Subject: Re: [Elecraft] [K3] K3 in SS SSB


> Tried calling back.
>
> BTW...if you want to do this, program your B>A FUNCTION in CONFIG to the 
> PF1 key.  Then
> in the MM "TU" macro use {CAT1ASC K31;SWH45;} at the end.  This will 
> exectue the PF1
> key and set the VFO B freq back to VFO A.
>
> Macro to set up using VFO A as RIT for Split:
>
> This macro should work (im not at my puter right now).
>
> SWT13;SWT13;FT1;LK$1;RT0;XT0;
>
> This should do A>B, A>B, enter split mode, lock VFO B, RIT off and XIT off
>
> To reset so that both VFOs are the same just use the PF1 key you used for 
> the MM macro.
>
> To turn this process off use the same macro saved to annother key and 
> replace LK$1 with
> LK$0.  This should equalize the VFOs and UNlock VFO B.
>
> Wayne,
>
> If that macro works it may be a good one to include in the next 
> programming reference
> update.
>
>
> -------------------------
> 73,
> Greg - AB7R
> Whidbey Island WA
> NA-065
>
>
> On Tue Nov 24 12:54 , Barry N1EU <barry.n1eu at gmail.com> sent:
>
>>On Tue, Nov 24, 2009 at 6:12 PM, Iain MacDonnell - N6ML ar at dseven.org> 
>>wrote:
>>>>>
>>>>>
>>>>>> Whether or not the K3 CAT API has been enhanced to make it
>>>>>> easier to read the split state, Logger isn't supporting it yet.
>>>
>>> FWIW, I tried this N1MM Logger feature last night - I hadn't paid
>>> attention to it before. It seems to work fine. I put the K3 into Split
>>> mode with the buttons on the front - not via N1MM Logger, and it was
>>> detected correctly. I didn't run a 48 hour contest with it, but a
>>> quick test seemed to suggest it works well.
>>
>>I'm not sure which Logger feature you tried Iain, but 9.11.0 is the
>>latest and "Reset RX freq to TX when QSO is logged (RUN & Split)" is
>>NOT working if you manually put the K3 into split mode, call cq, tune
>>off freq to pick up a caller and log the qso.  VfoA will stay off freq
>>instead of being matched to vfoB as it should and as it works on other
>>radios.
>>
>>73,
>>Barry N1EU
>>______________________________________________________________
>>Elecraft mailing list
>>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>Help: http://mailman.qth.net/mmfaq.htm
>>Post: Elecraft at mailman.qth.net','','','')">Elecraft at mailman.qth.net
>>
>>This list hosted by: http://www.qsl.net
>>Please help support this email list: http://www.qsl.net/donate.html
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.425 / Virus Database: 270.14.81/2524 - Release Date: 11/24/09 
19:37:00