[Elecraft] [K3] K3 in SS SSB

[Greg - AB7R]

Tried calling back.

BTW...if you want to do this, program your B>A FUNCTION in CONFIG to the PF1 key.  Then 
in the MM "TU" macro use {CAT1ASC K31;SWH45;} at the end.  This will exectue the PF1 
key and set the VFO B freq back to VFO A.

Macro to set up using VFO A as RIT for Split:

This macro should work (im not at my puter right now).

SWT13;SWT13;FT1;LK$1;RT0;XT0;

This should do A>B, A>B, enter split mode, lock VFO B, RIT off and XIT off

To reset so that both VFOs are the same just use the PF1 key you used for the MM macro.

To turn this process off use the same macro saved to annother key and replace LK$1 with 
LK$0.  This should equalize the VFOs and UNlock VFO B.

Wayne,

If that macro works it may be a good one to include in the next programming reference 
update.


-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065


On Tue Nov 24 12:54 , Barry N1EU <barry.n1eu at gmail.com> sent:

>On Tue, Nov 24, 2009 at 6:12 PM, Iain MacDonnell - N6ML ar at dseven.org> wrote:
>>>>
>>>>
>>>>> Whether or not the K3 CAT API has been enhanced to make it
>>>>> easier to read the split state, Logger isn't supporting it yet.
>>
>> FWIW, I tried this N1MM Logger feature last night - I hadn't paid
>> attention to it before. It seems to work fine. I put the K3 into Split
>> mode with the buttons on the front - not via N1MM Logger, and it was
>> detected correctly. I didn't run a 48 hour contest with it, but a
>> quick test seemed to suggest it works well.
>
>I'm not sure which Logger feature you tried Iain, but 9.11.0 is the
>latest and "Reset RX freq to TX when QSO is logged (RUN & Split)" is
>NOT working if you manually put the K3 into split mode, call cq, tune
>off freq to pick up a caller and log the qso.  VfoA will stay off freq
>instead of being matched to vfoB as it should and as it works on other
>radios.
>
>73,
>Barry N1EU
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: Elecraft at mailman.qth.net','','','')">Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html