[Elecraft] K3 in SS SSB

[Greg]

As soon as I started reading your email I though about assigning the 
function to PF2 and then using the SWH47; command.  I put the radio into 
split mode, locked VFO B and changed freq with VFO A.  The SWH47; command 
worked fine.  It set VFO A to match VFO B.  I think this is just what 
they're looking for.  Provided he does not mind using a PF key to do it.

73
Greg
AB7R

----- Original Message ----- 
From: "Iain MacDonnell - N6ML" <ar at dseven.org>
To: "Greg" <ab7r at cablespeed.com>
Cc: "K5WA" <K5WA at comcast.net>; <elecraft at mailman.qth.net>; <ab2tc at arrl.net>
Sent: Monday, November 23, 2009 8:22 PM
Subject: Re: [Elecraft] K3 in SS SSB


But the part about only bringing the menu item up, and not actuating
it, stands ... at least that's what happens when I enter "MN098;" with
the K3 Utility Command Tester. I'm not sure if it's possible to
actuate it via commands ... the menu entry is only there for the
purposes of assigning to a programmable function key. I suppose you
could assign it to a PF and the use "SWT" to emulate pressing that PF
button.

    ~Iain


On Mon, Nov 23, 2009 at 8:19 PM, Iain MacDonnell - N6ML <ar at dseven.org> 
wrote:
> Oh! I read "should have the same effect as CLEARRIT", and was
> surprised ... should have read back. Sorry!
>
> ~Iain
>
>
> On Mon, Nov 23, 2009 at 8:14 PM, Greg <ab7r at cablespeed.com> wrote:
>> Maybe I misunderstood what he was trying to do. I thought he was trying 
>> to
>> NOT use RIT, rather put the radio into split on a run frequency, lock VFO 
>> B
>> for TX and use VFO A to tune around your run freq instead of using the 
>> small
>> RIT knob. So RC; would not apply.
>>
>> ----- Original Message ----- From: "Iain MacDonnell - N6ML" 
>> <ar at dseven.org>
>> To: "Greg" <ab7r at cablespeed.com>
>> Cc: "K5WA" <K5WA at comcast.net>; <elecraft at mailman.qth.net>; 
>> <ab2tc at arrl.net>
>> Sent: Monday, November 23, 2009 8:02 PM
>> Subject: Re: [Elecraft] K3 in SS SSB
>>
>>
>> On Mon, Nov 23, 2009 at 5:27 PM, Greg <ab7r at cablespeed.com> wrote:
>>>
>>> Bob,
>>>
>>> Instead of {CLEARRIT} try {CAT1ASC K31;MN098;}
>>>
>>> I have not tried it yet but that should execute the VFO B>A which should
>>> have the same effect as CLEARRIT.
>>
>> Uhm... no? All that will do is bring up the "VFO B>A" menu entry...
>> and it's even it you actuated it, all it would do is to copy VFO B's
>> frequency to VFO A - and RIT would still be on, and you would have
>> QSYed to whatever frequency VFO B happened to be on.
>>
>> I believe a more suitable command would be {CAT1ASC K31;RC;}
>>
>> The "K31;" is probably unnecessary, but it shouldn't hurt.
>>
>> ~Iain / N6ML
>>
>>
>>> -----Original Message-----
>>> From: elecraft-bounces at mailman.qth.net
>>> [mailto:elecraft-bounces at mailman.qth.net]On Behalf Of K5WA
>>> Sent: Monday, November 23, 2009 4:57 PM
>>> To: elecraft at mailman.qth.net
>>> Cc: ab2tc at arrl.net
>>> Subject: Re: [Elecraft] K3 in SS SSB
>>>
>>>
>>> Knut,
>>>
>>>
>>>
>>> That won't work because it doesn't allow N1MM's {CLEARRIT} feature to
>>> resent
>>> the RX back to zero as each contact gets logged. Some guys actually call
>>> on
>>> frequency too! ;-) I may look at using an Elecraft MACRO and a call from
>>> N1MM to accomplish the same thing with bigger knobs though. If there is 
>>> a
>>> way to tell VFO A to reset to VFO B's frequency without changing any
>>> filters/etc., it might work.
>>>
>>>
>>>
>>> Bob K5WA
>>>
>>>
>>>
>>>
>>>
>>> SNIP >>>>>>>>>>>>>>>>>>>>
>>>
>>> If you are running a frequency, why don't to put the rig in split mode 
>>> and
>>>
>>> lock the B VFO instead of using the RIT?
>>>
>>>
>>>
>>> AB2TC Knut
>>>
>>>
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>
>>
>> --------------------------------------------------------------------------------
>>
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com
>> Version: 8.5.425 / Virus Database: 270.14.79/2522 - Release Date: 
>> 11/23/09
>> 19:45:00
>>
>>
>


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.425 / Virus Database: 270.14.79/2522 - Release Date: 11/23/09 
19:45:00