[Elecraft] K3 in SS SSB

[Iain MacDonnell - N6ML]

That seems to work ... I assigned "CONFIG:VFO B>A" to PF1 (Hold of RIT
button), and "K31;SWH 45;" has the desired effect...

    ~Iain


On Mon, Nov 23, 2009 at 8:22 PM, Iain MacDonnell - N6ML <ar at dseven.org> wrote:
> But the part about only bringing the menu item up, and not actuating
> it, stands ... at least that's what happens when I enter "MN098;" with
> the K3 Utility Command Tester. I'm not sure if it's possible to
> actuate it via commands ... the menu entry is only there for the
> purposes of assigning to a programmable function key. I suppose you
> could assign it to a PF and the use "SWT" to emulate pressing that PF
> button.
>
>    ~Iain
>
>
> On Mon, Nov 23, 2009 at 8:19 PM, Iain MacDonnell - N6ML <ar at dseven.org> wrote:
>> Oh! I read "should have the same effect as CLEARRIT", and was
>> surprised ... should have read back. Sorry!
>>
>>    ~Iain
>>
>>
>> On Mon, Nov 23, 2009 at 8:14 PM, Greg <ab7r at cablespeed.com> wrote:
>>> Maybe I misunderstood what he was trying to do.  I thought he was trying to
>>> NOT use RIT, rather put the radio into split on a run frequency, lock VFO B
>>> for TX and use VFO A to tune around your run freq instead of using the small
>>> RIT knob.  So RC; would not apply.
>>>
>>> ----- Original Message ----- From: "Iain MacDonnell - N6ML" <ar at dseven.org>
>>> To: "Greg" <ab7r at cablespeed.com>
>>> Cc: "K5WA" <K5WA at comcast.net>; <elecraft at mailman.qth.net>; <ab2tc at arrl.net>
>>> Sent: Monday, November 23, 2009 8:02 PM
>>> Subject: Re: [Elecraft] K3 in SS SSB
>>>
>>>
>>> On Mon, Nov 23, 2009 at 5:27 PM, Greg <ab7r at cablespeed.com> wrote:
>>>>
>>>> Bob,
>>>>
>>>> Instead of {CLEARRIT} try {CAT1ASC K31;MN098;}
>>>>
>>>> I have not tried it yet but that should execute the VFO B>A which should
>>>> have the same effect as CLEARRIT.
>>>
>>> Uhm... no? All that will do is bring up the "VFO B>A" menu entry...
>>> and it's even it you actuated it, all it would do is to copy VFO B's
>>> frequency to VFO A - and RIT would still be on, and you would have
>>> QSYed to whatever frequency VFO B happened to be on.
>>>
>>> I believe a more suitable command would be  {CAT1ASC K31;RC;}
>>>
>>> The "K31;" is probably unnecessary, but it shouldn't hurt.
>>>
>>>   ~Iain / N6ML
>>>
>>>
>>>> -----Original Message-----
>>>> From: elecraft-bounces at mailman.qth.net
>>>> [mailto:elecraft-bounces at mailman.qth.net]On Behalf Of K5WA
>>>> Sent: Monday, November 23, 2009 4:57 PM
>>>> To: elecraft at mailman.qth.net
>>>> Cc: ab2tc at arrl.net
>>>> Subject: Re: [Elecraft] K3 in SS SSB
>>>>
>>>>
>>>> Knut,
>>>>
>>>>
>>>>
>>>> That won't work because it doesn't allow N1MM's {CLEARRIT} feature to
>>>> resent
>>>> the RX back to zero as each contact gets logged. Some guys actually call
>>>> on
>>>> frequency too! ;-) I may look at using an Elecraft MACRO and a call from
>>>> N1MM to accomplish the same thing with bigger knobs though. If there is a
>>>> way to tell VFO A to reset to VFO B's frequency without changing any
>>>> filters/etc., it might work.
>>>>
>>>>
>>>>
>>>> Bob K5WA
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> SNIP >>>>>>>>>>>>>>>>>>>>
>>>>
>>>> If you are running a frequency, why don't to put the rig in split mode and
>>>>
>>>> lock the B VFO instead of using the RIT?
>>>>
>>>>
>>>>
>>>> AB2TC Knut
>>>>
>>>>
>>>>
>>>> ______________________________________________________________
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Elecraft at mailman.qth.net
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>
>>>> ______________________________________________________________
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Elecraft at mailman.qth.net
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>
>>>
>>>
>>> --------------------------------------------------------------------------------
>>>
>>>
>>>
>>> No virus found in this incoming message.
>>> Checked by AVG - www.avg.com
>>> Version: 8.5.425 / Virus Database: 270.14.79/2522 - Release Date: 11/23/09
>>> 19:45:00
>>>
>>>
>>
>