[Elecraft] K3 Utility

[WILLIS COOKE]

What operating system are you using Barry?  I have been having similar problems with XMlog.  I am using Windows 7 and the USB cable with the Prolific chip and driver.  My computer is a HP Pavilion with 8 Gig RAM and the AMD processor.
Willis 'Cookie' Cooke 
K5EWJ 




________________________________
From: Barry Simpson <vk2bj at optusnet.com.au>
To: elecraft at mailman.qth.net
Sent: Thu, November 12, 2009 9:35:41 PM
Subject: [Elecraft] K3 Utility

I just downloaded the latest K3 Utility and Beta Firmware. Although the
downloads were successful, the K3 would no longer talk to my logging program
(Turbolog 4).



At first I thought the problem was related to the new firmware but after
reloading an older version with the same result, I guessed, correctly, that
the new K3 Utility was the issue.



My logging program was set at 4800 baud for the K3 previously whereas I
discovered that the new K3 Utility runs at 9600 baud. I did a quick edit of
the K3 parameters in the logging program and all is fine again.



This may be of interest to anyone who is having similar problems.



73



Barry Simpson  VK2BJ

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html