[Elecraft] K3 Utility

[Don Wilhelm]

Barry,

My K3 Utility runs successfully at 38400 baud.  Try a faster setting.

73,
Don W3FPR

Barry Simpson wrote:
> I just downloaded the latest K3 Utility and Beta Firmware. Although the
> downloads were successful, the K3 would no longer talk to my logging program
> (Turbolog 4).
>
>  
>
> At first I thought the problem was related to the new firmware but after
> reloading an older version with the same result, I guessed, correctly, that
> the new K3 Utility was the issue.
>
>  
>
> My logging program was set at 4800 baud for the K3 previously whereas I
> discovered that the new K3 Utility runs at 9600 baud. I did a quick edit of
> the K3 parameters in the logging program and all is fine again.
>
>  
>
> This may be of interest to anyone who is having similar problems.
>
>  
>   
>