[Elecraft] I screwed up.

[Dave Hachadorian]

What happens if you just unplug the serial cable before you turn 
on the rig?

Dave Hachadorian, K6LL
Yuma, AZ


----- Original Message ----- 
From: "PAUL VANOVEREN" <nf8j at iserv.net>
To: "ELECRAFT REFLECTOR" <elecraft at mailman.qth.net>
Cc: "Gary Surrency" <support at elecraft.com>
Sent: Monday, November 09, 2009 1:47 PM
Subject: [Elecraft] I screwed up.


> Playing around with my K3   serial # 756  and the setting for 
> N1MM and changed the DTR-RTS, or PTT settings and now the radio 
> is in transmit always on the 60 meter band and when I push the 
> MENU, COFIG button, the firmware version comes up, but if I 
> rotate the  B VFO to try and get to some other menu item, it 
> locks up, turning to the right bet to FL1 and locks and turing 
> to the right   byp   kat3 and locks up. Is there some way to do 
> a soft or hard reset and bring everything back to the default 
> settings ??? Can't find it in the owners manual...sorry..
>
> Paul  NF8J...
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: 
> http://www.qsl.net/donate.html