[Elecraft] I screwed up.

[Don Wilhelm]

Paul,

Sorry for your predicament!
See "Parameter Initialization" on page 61 of the K3 manual, it explains 
the reset procedure in detail.  Too much to repeat here.

73,
Don W3FPR

PAUL VANOVEREN wrote:
> Playing around with my K3   serial # 756  and the setting for N1MM and changed the DTR-RTS, or PTT settings and now the radio is in transmit always on the 60 meter band and when I push the MENU, COFIG button, the firmware version comes up, but if I rotate the  B VFO to try and get to some other menu item, it locks up, turning to the right bet to FL1 and locks and turing to the right   byp   kat3 and locks up. Is there some way to do a soft or hard reset and bring everything back to the default settings ??? Can't find it in the owners manual...sorry..
>
> Paul  NF8J...
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 9.0.698 / Virus Database: 270.14.56/2491 - Release Date: 11/09/09 02:39:00
>
>