[Elecraft] [K3] KUSB+Logger32

[N5WNG]

Mike,
I have been using Logger32 for about 10 years and have had virtually no
issues. I currently have 3 USB to serial adapters running on my PC, one for
the Yaesu and two connected to the K-3, one for reading the data from the
radio into Logger32, the other for the Logger32 CW keyer. At this moment CPU
usage is running 2-7% with both Logger32 running and LP-Bridge running. PC
is running XP and is a dual core Intel machine. Hope this helps.

Mike -N5WNG


Mike Harris-9 wrote:
> 
> G'day,
> 
> Tried using my KUSB today.  Loaded latest driver and all communicates well 
> between K3 Utility and K3.  I modified the power on banner OK.
> 
> Changed the com port in Logger32 to the same and after the first read of 
> frequency Logger32 freezes and needs the three finger salute.  CPU seems 
> to be running at 100%
> 
> K3+RS232+Logger32 can be running OK.  Change over to KUSB, change the com 
> port in Logger32 and it freezes.
> 
> KUSB plugged into any USB port on the PC not via a hub.
> 
> Changed the port speed for both K3 and KUSB from 38400 to 9600 no change.
> 
> Anyone else seen this?
> 
> Regards,
> 
> Mike VP8NO 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> 

-- 
View this message in context: http://n2.nabble.com/KUSB%2BLogger32-tp2966594p2969289.html
Sent from the [K3] mailing list archive at Nabble.com.