[Elecraft] [K3] KUSB+Logger32

[Ignacy]

Initially Logger32 was was locking all the time when I used KUSB. Downloads
from the chip manufacturer did not help. Then some 2 months ago Elecraft
posted a new driver, I downloaded it, and everything was fine ever since. 
This is under Vista.




Mike Harris-9 wrote:
> 
> G'day,
> 
> Tried using my KUSB today.  Loaded latest driver and all communicates well 
> between K3 Utility and K3.  I modified the power on banner OK.
> 
> Changed the com port in Logger32 to the same and after the first read of 
> frequency Logger32 freezes and needs the three finger salute.  CPU seems 
> to be running at 100%
> 
> K3+RS232+Logger32 can be running OK.  Change over to KUSB, change the com 
> port in Logger32 and it freezes.
> 
> KUSB plugged into any USB port on the PC not via a hub.
> 
> Changed the port speed for both K3 and KUSB from 38400 to 9600 no change.
> 
> Anyone else seen this?
> 
> Regards,
> 
> Mike VP8NO 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> 

-- 
View this message in context: http://n2.nabble.com/KUSB%2BLogger32-tp2966594p2968632.html
Sent from the [K3] mailing list archive at Nabble.com.