[Elecraft] K3 FSK Passband Frequency

[Lyle Johnson]

> I'm using FSK-D.
> To tune in an FSK signal I need to use Shift to shift the signal to the right of the passband display on the K3 
> (centered over the right side arrow). This then places the signal in the center of the MTTY display. However, received 
> signals are now about 0.55 KHz higher than spotted reports...

Use the K3 PITCH to set the RTTY tones to match the selected MTTY tone 
pitch (or vice-versa).

73,

Lyle KK7P