[Elecraft] K3 Tuning encoder pulses and birdie problem

[wayne burdick]

Joe Planisky wrote:

> I also have the encoder noise around 28005 - 28010.  Turning on the NB 
> at t1-4 does suppress the pulses.  Not completely but they're 
> definitely reduced.

Also try t1-5.

These are very low DSP NB settings. They should have a negligible 
effect on normal signals, so you can use this if necessary (i.e., if 
you can hear tuning noise even with an antenna connected). Meanwhile, 
I'll be looking into the cause.

73,
Wayne
N6KR

---

http://www.elecraft.com