[Elecraft] K3 digital mode audio input via LINE IN
Iain MacDonnell - N6ML
ar at dseven.org
Tue Mar 24 14:16:08 EDT 2009
Brian,
You want to set "MAIN:MIC SEL" to "Line In" (when in "DATA" mode), then
use the "MIC" knob to set the line-in level. I don't think you need (or
want) "MIC+LIN".
~Iain / N6ML
nekvtster at gmail.com wrote:
> Dick,
>
> I understand now. One has to use the main MENU MIC SEL to adjust the LINE
> IN level, then one can switch to MIC+LIN = ON.
>
> Thanks,
>
> 73 -- Brian -- K1LI
>
> On Mar 24, 2009 1:40pm, Dick Dievendorff <dieven at comcast.net> wrote:
>> Have you adjusted the Line In level to an appropriate value?
>
>
>
>> Dick, K6KR
>
>
>
>
>
>> -----Original Message-----
>
>> From: elecraft-bounces at mailman.qth.net
>
>> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Brian Machesney
>
>> Sent: Tuesday, March 24, 2009 10:34 AM
>
>> To: Elecraft reflector
>
>> Subject: [Elecraft] K3 digital mode audio input via LINE IN
>
>
>
>> I can't get the K3 to transmit using audio supplied to the LINE IN jack.
>> I'm
>
>> working in DATA A mode. I CAN transmit with audio supplied to both the
>
>> front- and rear-panel MIC jacks. I have tried selecting the main MENU MIC
>
>> SEL = LINE IN as well as the MIC+LIN = ON setting, but no go. Any
>
>> suggestions as to what I've forgotten to set up?
>
>
>
>> 73 -- Brian -- K1LI
>
>> ______________________________________________________________
>
>> Elecraft mailing list
>
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>
>> Help: http://mailman.qth.net/mmfaq.htm
>
>> Post: mailto:Elecraft at mailman.qth.net
>
>
>
>> This list hosted by: http://www.qsl.net
>
>> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list