[Elecraft] K3 digital mode audio input via LINE IN

Tue Mar 24 14:05:05 EDT 2009

Dick,

I understand now. One has to use the main MENU MIC SEL to adjust the LINE  
IN level, then one can switch to MIC+LIN = ON.

Thanks,

73 -- Brian -- K1LI

On Mar 24, 2009 1:40pm, Dick Dievendorff <dieven at comcast.net> wrote:
> Have you adjusted the Line In level to an appropriate value?

> Dick, K6KR

> -----Original Message-----

> From: elecraft-bounces at mailman.qth.net

> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Brian Machesney

> Sent: Tuesday, March 24, 2009 10:34 AM

> To: Elecraft reflector

> Subject: [Elecraft] K3 digital mode audio input via LINE IN

> I can't get the K3 to transmit using audio supplied to the LINE IN jack.  
> I'm

> working in DATA A mode. I CAN transmit with audio supplied to both the

> front- and rear-panel MIC jacks. I have tried selecting the main MENU MIC

> SEL = LINE IN as well as the MIC+LIN = ON setting, but no go. Any

> suggestions as to what I've forgotten to set up?

> 73 -- Brian -- K1LI

> ______________________________________________________________

> Elecraft mailing list

> Home: http://mailman.qth.net/mailman/listinfo/elecraft

> Help: http://mailman.qth.net/mmfaq.htm

> Post: mailto:Elecraft at mailman.qth.net

> This list hosted by: http://www.qsl.net

> Please help support this email list: http://www.qsl.net/donate.html