[Elecraft] DATA A Mode Changes to AFSK A

[Joe Planisky]

Well, I must partially recant my recantation.  After posting that  
email, I went to another band and noticed the data mode was AFSK-A.   
In fact, on every band EXCEPT the one I was on when I did the firmware  
down/upgrades (20m), the data mode was AFSK-A.

I tried shuffling the firmware again, but could not reproduce.  All  
bands stayed on DATA-A.

73
--
Joe KB8AP



On Mar 9, 2009, at 9:15 PM, Joe Planisky wrote:

> Hi Don,
>
> I just went back and tried several firmware changes and the K3 has  
> made a liar out of me.  It stayed in DATA A through the changes.    
> But that makes it all the more worrisome.  I never use AFSK A, but  
> have definitely found the rig in that mode after firmware updates.
>
> 73
> --
> Joe KB8AP
>
> On Mar 9, 2009, at 5:06 PM, Don Wilhelm wrote:
>
>> Joe,
>>
>> I have done many firmware upgrades and my data mode has stayed the  
>> same as it was previously set.
>> I have mine currently set to PSK D, so there is not an exact  
>> comparison with your experience, but I really don't think it is the  
>> firmware upgrade causing it.
>>
>> 73,
>> Don W3FPR
>