[Elecraft] V3.19

[Don Wilhelm]

Brian,

I have no answer on the incorrect frequency, but
CWrev is upper sideband.  I guess that is the main reason CW rev is 
required.
If you are going from CW normal, there would have to be twice the CW 
offset figured in.  That may be your 'wrong frequency' answer - the K3 
compensates for the CW offset only once, not two times the offset.

73,
Don W3FPR. 

Brian Alsop wrote:
> Using the CW offset feature to go from SSB > CW modes .  Works as 
> advertised.
>
> However when I click on a spot when in CW mode to go to USB something 
> is odd:
> Example:
> In CW mode at 50.110
> Click on spot on 50.125
> Radio goes to USB mode at 50.124.47  -- 50.125 minus CW offset of 530 Hz.
>
> Anybody else seeing this?
>
> I also wonder why one have to use reverse CW to get to an exact CW 
> freq from USB frequency mode change.   Yes, this was stated in 
> release.  However, why should it matter?  I personally always use 
> normal CW.
> 73 de Brian/K3KO
> ------------------------------------------------------------------------
>