[Elecraft] SPL N/A with everybody on CW?

[Brett Howard]

Ok I just found this link:
http://www.zerobeat.net/mediawiki/index.php/Cross-Band_Operation

Which leads me to believe I was just on the same band when I saw my
radio adeptly switching from one VFO to the other.  Man not being able
to have a different band on each VFO and easily switch between making
contacts on each one really hinders the n1mm/k3/krx3 combo quite
heavily.  When I bought the KRX3 for FD this year that was one of the
major reasons for my purchase...

~Brett

On Fri, 2009-06-19 at 23:42 -0700, Brett Howard wrote:
> Wow I just tried doing an EE Init and set things up from scratch for the
> beginning bit and then gave things a try and I was still unable to get
> cross band split to work as it should.  This nearly makes using N1MM for
> SO2V nearly useless and really degrades the usefulness of the KRX3.  Man
> I sure hope I can figure this out before FD!  I was excited when it was
> working before!  
> 
> Before I could simply click in the log window for VFO A or on a DX Spot
> and poof the TX arrow would point up.  Then simply click on a spot in
> the VFO B band map and poof you're on that freq and you're TX arrow is
> pointing down.  Almost felt like a SO2R setup even though it was just
> SO2V.  
> 
> :(
> 
> ~KC7OTG
> 
> On Fri, 2009-06-19 at 22:42 -0700, Brett Howard wrote:
> > I should also state that I swear this was just working a minute ago and
> > now I seem to always get SUB N/A unless both VFO's are on the same band.
> > 
> > On Fri, 2009-06-19 at 22:20 -0700, Brett Howard wrote:
> > > Right now I've got VFO A on 14.030.00 and VFO B on 7.027.00 and I'd like
> > > to transmit on the VFO B freq.  Or I'm trying to setup N1MM so that when
> > > I click on the VFO B log section that it switches on split so that I can
> > > TX in the right band.  But I keep getting SPL N/A.  I even then tapped
> > > A->B twice and then went back to those frequencies and still got SPL
> > > N/A.  Seems like I'm unable to use the split and TX on VFO B if I'm on
> > > independant bands?  And yes both are set to CW.
> > > 
> > > Any ideas what I'm doing wrong?
> > > 
> > 
>