[Elecraft] K-3 RIT readout

[Steve Ellington]

Good grief! That reminds me of the old Omni V which had no RIT. TenTec used 
the same logic and it only lasted through one model number.....The main pain 
about this is when you tune off and forget to double tap then call CQ half a 
band away. Yes I had separate tx and rx back in the old days but even that 
was easier than all this button tapping.
ZUT CW Forever etc. tap tap tap tap! The key, not the buttons!
Steve
N4LQ
N4LQ at carolina.rr.com
----- Original Message ----- 
From: "N5GE" <n5ge at n5ge.com>
To: "Elecraft Reflector" <elecraft at mailman.qth.net>
Sent: Sunday, July 26, 2009 10:05 AM
Subject: Re: [Elecraft] K-3 RIT readout


> KZ5D at aol.com wrote:
>
> As a mostly CW operator, I never use RIT or XIT.
>
> When calling CQ I set the B VFO to TX and call CQ in split.  When A
> station calls me off frequency I simply tune him in with the A VFO.  If
> he drifts, I follow him with the A VFO.
>
> When answering a CQ I tune the other station in with the A VFO, double
> tap the A>B button to set the B VFO to the frequency and mode of the A
> VFO, go to split, TXing on the B VFO.
>
> When in a net, I tune the  NCS on A, double tap A>B, go to split and
> when one of the other stations is not on freq I tune them in with the A 
> VFO.
>
> These procedures were learned in the day when I had separate TX and RX
> rigs and they still work very well today.
>
> If you have not tried these things, you should.  These things are fun,
> and fun is good.
>> Hi,
>>
>> What's the chance of adding the RIT or XIT readout on the display in 
>> small
>> numbers next to the RIT or XIT oval?
>>
>> Although you can see the amount of offset change as you rotate the knob, 
>> it
>>  would be helpful to have the amount of offset visible to the operator at
>> all  times.
>>
>> 73,
>>
>> Art KZ5D
>> **************An Excellent Credit Score is 750. See Yours in Just 2 Easy
>> Steps!
>> (http://pr.atwola.com/promoclk/100126575x1221323048x1201367271/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=62&bcd=Jul
>> yExcfooterNO62)
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html