[Elecraft] [K3] Power variations in K3 / 3.19

AB3EN ab3en at amsat.org
Sat Jul 11 07:34:20 EDT 2009


I also had issues with this issue and Wayne suggested that I look at my TXG
VCE setting and move it to 1.0 ~2.0 db I have mine set to 2.0 and it seems
to help.

73Dan AB3EN


Greg Williams-4 wrote:
> 
> I suggest that you make sure that you have run the "Calibrate 
> Transmitter gain "  in the configuration section of the Elecraft K3 
> Utility.  That fixed an issue I had that was similar to yours.
> 
> Greg VK3VT
> 
> Subject:
> Re: [Elecraft] [K3] Power variations in K3 / 3.19
> From:
> ab2tc <ab2tc at arrl.net>
> Date:
> Thu, 9 Jul 2009 07:35:09 -0700 (PDT)
> 
> To:
> elecraft at mailman.qth.net
> 
> 
> I have this problem also, not only after power up, but after each band
> change. My favorite workaround is to change mode to data FSK, switch to
> dummy load, then press PTT  for a couple of seconds. Back to SSB and I
> have
> full talk power immediately. 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> 


-----

Dan AB3EN
-- 
View this message in context: http://n2.nabble.com/Power-variations-in-K3---3.19-tp3231601p3241381.html
Sent from the [K3] mailing list archive at Nabble.com.


More information about the Elecraft mailing list