[Elecraft] Poor man's pan adapter - K2 Panadapter - K2 Pactor III

[Jim Campbell]

Jack and Ron,

Sorry, but I was thinking about one thing and talking about another.  I
had also made some modifications to my K2 to allow me to drive a
PTC-IIusb pactor modem.  That modification is the one that was
originally done by a German ham.  So I was thinking about the pactor
modification when talking about the panadapter modification.  My only
excuse is that my aging mind is easily confused.

Jack, question:  Do you plan to offer an LP-Bridge program for the K2?

73,

Jim - W4BQP

Jack Smith wrote:
> Jim:
>
> If you are going to extract an IF sample out of the K2, the Z10000
> buffer amplifier can be installed inside the K2 with the internal
> installation option. This provides a convenient IF output with
> bandpass filtering, protected against short circuits on the IF sample
> port connector and with excellent  isolation--around 100 dB reverse
> gain when installed according to the instructions provided with the
> Z10000 kit.
>
> There's an embarrassingly long manual with the details on installing
> the Z10000 inside a K2 at
> http://www.cliftonlaboratories.com/elecraft_k3_and_panadapters.htm
>
> Jack K8ZOA
> www.cliftonlaboratories.com
>
>
>