[Elecraft] K3 Audio and Remote I/O Module Chokes

[Doug Joyce]

Bob:  Suggest that you refer this question to Elecraft Support.  Based on
the S/N they should be able to tell you if the mods have been done or not.

73,
Doug   VE3MV
K3/100, S/N 2432

----- Original Message ----- 
From: "Robert Dorchuck" <w6vy at verizon.net>
To: <elecraft at mailman.qth.net>
Sent: Friday, February 27, 2009 9:50 AM
Subject: [Elecraft] K3 Audio and Remote I/O Module Chokes


> Good Morning All,
>
> Just received K3 Serial 2765 yesterday afternoon.
> In looking at the Audio I/O board chokes L3, L5 and L8
> are still in place and not jumpered.  L7 (Mic ground choke
> has been removed).
>
> On the Remote I/O module L1 (RS232 ground return) is still in
> place.
>
> Do I still need to install the jumpers around these chokes per
> the Application Note?
>
> Or are these changes optional?
>
> Thanks,
> Bob  W6VY
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>


-- 
I am using the free version of SPAMfighter.
We are a community of 6 million users fighting spam.
SPAMfighter has removed 1012 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len

The Professional version does not have this message