[Elecraft] K3 Audio and Remote I/O Module Chokes

[Jim]

Robert, when I got to the part concerning the chokes I was told if you are
not having a problem leave as is, so I did (I did add the jumper to mic
....same with sense mod (However I did the sense mod anyway).

73 de KE4WY Jim

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Robert Dorchuck
Sent: Friday, February 27, 2009 9:50 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 Audio and Remote I/O Module Chokes

Good Morning All,

Just received K3 Serial 2765 yesterday afternoon.
In looking at the Audio I/O board chokes L3, L5 and L8
are still in place and not jumpered.  L7 (Mic ground choke
has been removed).

On the Remote I/O module L1 (RS232 ground return) is still in
place.

Do I still need to install the jumpers around these chokes per
the Application Note?  

Or are these changes optional?

Thanks,
Bob  W6VY
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html