[Elecraft] terminal window in k3 utility
Don Wilhelm
w3fpr at embarqmail.com
Thu Feb 12 10:48:35 EST 2009
Rich,
That is an excellent solution - I don't normally use the K3 Utility
Command Tester or Terminal window for things like that, so I just did
not think of it. I am more of a 'knobs and buttons' guy except when I
am running digital modes.
Along that same line, it may be that visually impaired K3 operators may
do well to download and study the K3 Programmer's Reference manual to
see if issuing commands through K3Utility or other terminal programs
would be an easy way to set up the K3 for any particular set of
operating conditions. Setting up macros/memories in K3 Utility may also
be helpful.
73,
Don W3FPR
Richard Ferch wrote:
> There are software commands that can be used to select any of the K3's four
> data submodes.
>
> The DT0; command selects DATA A, DT1; selects AFSK A, DT2; selects FSK D and
> DT3; selects PSK D.
>
> If you are using the K3 Utility, you can use the Command Tester to send one
> of these commands to ensure that the K3 is in the desired data submode.
>
> 73,
> Rich VE3KI
>
> Don W3FPR wrote:
>
>
>> I am not certain how hams like you and Gary would know the correct
>> setting for the mode and DATA MD unless you first have a sighted helper
>> or other assist to read the display.
>>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.0.234 / Virus Database: 270.10.23/1949 - Release Date: 02/11/09 08:01:00
>
>
More information about the Elecraft
mailing list