[Elecraft] terminal window in k3 utility

[Richard Ferch]

There are software commands that can be used to select any of the K3's four
data submodes.

The DT0; command selects DATA A, DT1; selects AFSK A, DT2; selects FSK D and
DT3; selects PSK D.

If you are using the K3 Utility, you can use the Command Tester to send one
of these commands to ensure that the K3 is in the desired data submode.

73,
Rich VE3KI

Don W3FPR wrote:

> I am not certain how hams like you and Gary would know the correct 
> setting for the mode and DATA MD unless you first have a sighted helper 
> or other assist to read the display.