[Elecraft] K3 TRANSMIT PROBLEM
Joe Subich, W4TV
lists at subich.com
Sat Feb 7 21:35:24 EST 2009
> But eventually they came up with the 6-pin mini-DIN DATA
> connector, mostly used at VHF/UHF.
Except that's STILL not uniform ... pin 4 is variously 9600
baud receive audio on (Icom, Yaesu), FSK input (Yaesu
FT-450/950) or unused (Kenwood).
> It is useable on HF on the IC-706 and IC-7000
IC-703, IC-706mkIIg and IC-7000 only. Icom did not add it to
either of their newest transceivers (7200 or 7700).
73,
... Joe, W4TV
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Doug
> Faunt N6TQS +1-510-655-8604
> Sent: Saturday, February 07, 2009 6:26 PM
> To: kk7p at wavecable.com
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 TRANSMIT PROBLEM
>
>
> But eventually they came up with the 6-pin mini-DIN DATA
> connector, mostly used at VHF/UHF. It is useable on HF on
> the IC-706 and IC-7000 and I had the same layout on my K2's
> when using the EA3BLQ interface.
>
> It's not TOTALLY hopeless.
>
> 73, doug
>
> Date: Sat, 07 Feb 2009 15:09:13 -0800
> From: Lyle Johnson <kk7p at wavecable.com>
>
> > ...Frankly, someone needs to bash some heads and get all of
> > the vendors to standardize on a single 8-pin format.
>
> In the mid-1980s I was part of the ARRL's Digital
> Committee. We tried
> very hard to get the major Amateur radio manufacturers to
> standardize
> this. In our case, it was to make it easier on folks to
> hook up TNCs
> and computers tot heir radios.
>
> We were politely told that it would be "very difficult." This is
> polite-speak for "Not a chance." :-/
>
> Now, I think the best way to make this happen is for
> everyone to own a K3...
>
> 73,
>
> Lyle KK7P
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list