[Elecraft] K3 TRANSMIT PROBLEM

[Jim]

Bill, the adapter you probably have for your ProSet is the one with the
yellow band (Yaesu), you need to rewire it (Wiring Diagram is in the K-3
manual)or get the Heil adapter with the red band (Kenwood). Then you should
be ok.

73 de KE4WY Jim

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of bill wade
Sent: Saturday, February 07, 2009 5:32 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 TRANSMIT PROBLEM

Many thanks for all the suggestions. I checked the pin outs for both the 
k3 and the Omni 7 on the Heil website, and they look completely 
different.  I am wondering if that is my problem?

Bill Ai4PF
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html