[Elecraft] Front Pannel Hand Mic (HM2)

[Rob Gault]

Don,

Thank you very much, that was it!  I don't know how I missed that, I  
thought I had tried every iteration and combination in the Mic Sel menu.

73,
Rob
KC2VMP


On Dec 13, 2009, at 2:15 PM, Don Wilhelm wrote:

> Rob,
>
> Turn BIAS on - both those mics need it, and there will be no output  
> without the boas voltage.
>
> 73,
> Don W3FPR
>
>
> Rob Gault wrote:
>> I have a brand new K3 that I just completed this past week (with a   
>> little help from the reflector, thank you!).
>>
>> Now I am having a problem with the 8 pin mic connector on the  
>> front,  neither the Hand Mic nor the pro-set work with it (using  
>> the Elecraft  supplied adaptor).  I was able to connect the mic  
>> from the headset to  the rear of the K3 and confirm that I can in  
>> fact transmit voice.  I  have MIC SEL set to FP.H (I've also tried  
>> FP.L) and MIC+LIN ON.  Is  there another setting that I am missing  
>> to enable the Hand Mic on the  front of the unit?
>>
>> The PTT does work on the FP Mic input as I was able to use the  
>> Hand  Mic to key and transmit CW and SSB with the headset connected  
>> to the  back.
>>
>> Thank you,
>>
>> Rob
>> KC2VMP
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> ------------------------------------------------------------------------
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com Version: 9.0.716 / Virus Database:  
>> 270.14.105/2562 - Release Date: 12/13/09 02:39:00
>>
>>