[Elecraft] Front Pannel Hand Mic (HM2)

[Don Wilhelm]

Rob,

Turn BIAS on - both those mics need it, and there will be no output 
without the boas voltage.

73,
Don W3FPR


Rob Gault wrote:
> I have a brand new K3 that I just completed this past week (with a  
> little help from the reflector, thank you!).
>
> Now I am having a problem with the 8 pin mic connector on the front,  
> neither the Hand Mic nor the pro-set work with it (using the Elecraft  
> supplied adaptor).  I was able to connect the mic from the headset to  
> the rear of the K3 and confirm that I can in fact transmit voice.  I  
> have MIC SEL set to FP.H (I've also tried FP.L) and MIC+LIN ON.  Is  
> there another setting that I am missing to enable the Hand Mic on the  
> front of the unit?
>
> The PTT does work on the FP Mic input as I was able to use the Hand  
> Mic to key and transmit CW and SSB with the headset connected to the  
> back.
>
> Thank you,
>
> Rob
> KC2VMP
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 9.0.716 / Virus Database: 270.14.105/2562 - Release Date: 12/13/09 02:39:00
>
>