[Elecraft] K3 VFO B Anomaly

[Don Wilhelm]

Paul,

The VFOs are staying on the same "band".
If you want different behavior, set VFO IND on in the menu.

73,
Don W3FPR

W2LE wrote:
> I see similar strange things when tuning VFO A around 4.800.  When VFO A 
> is below 4.800 B is at 4799.96 - when A goes above 4.800 B goes to 5.285 
> MHz.  This is on SN 1114 - 3.25
>
> Glad I don't normally listen there.
>
> Paul  W2LE
>
> Robert Beard wrote:
>   
>> Good Morning List,
>>
>> Just noticed, while tuning VFO A down through 4.800.0 MHz, I can hear a relay switching. 
>> I believe this is band pass filter switching on the KBPF3 board.
>>
>> All well and good, except that VFO B jumps to 3.526.76 MHz at the switching point, regardless of any previous setting.
>>
>> When tuning VFO A back up through 4.8 MHz., the relay switches and VFO B jumps to 5.300.00 MHz.
>>
>> Anyone else seeing this curious behavior? (Or am I missing something....?)
>>
>> K3 is s/n 1500 with 3.14/2.16/2.16 installed.
>>
>> Best regards,
>>
>> Rob, N6VX
>>     
>